Stainless Steel Cord Grips

Cord Grips without mesh

Standard Cord Grips with no strain relief mesh still provide strain relief and pullout protection in accordance with UL and are available in sizes from 3/8″ NPT up to 3″ NPT.

Cord Grips with Strain Relief Mesh

Some applications need additional strain relief, pullout protection, and protection from cable bending/kinking near termination points. cord grips made of stainless steel are available with additional strain relief mesh are available in sizes from 3/8″ NPT up to 3″ NPT.

Stainless Steel Cord Grip Features

Stainless Steel cord grip connectors include an embedded Buna-N O-Ring.  These connectors are recommended for use in washdowns or high moisture environments in food processing plants, petrochemical facilities, wastewater treatment plants, pulp &paper mills, and chemical manufacturing factories.  (Note:  Type 316 stainless steel is also available upon request.)

Available in thread sizes from 3/8″ NPT to 4″ NPT.

The standard bushings included in the connectors have 1 hole and are neoprene. Optionally, there are multiple hole bushings to support multiple wires/cables passing through & silicone bushings for high-temperature applications.

Type 304 stainless steel is the standard material. Type 304 stainless steel is used in the Food and Beverage industry, Chemical and Petrochemical industry, and anywhere higher corrosion resistance is needed.

Type 316 stainless steel is an optional material often used in the Chemical Processing industry, Medical industry, Pharmaceutical industry, marine and coastal environments, and in areas that require the most corrosion resistance.